Above of CW-D1000 are large horizontal dryers, which are suitable for mixing and drying plastic raw materials in particles or powders. And it dried surface moisture of the material by heat conduction. It is suitable for equipment of the front or back process in extrusion. And it is also suitable for two kinds of additives pre-mixing, so that can makes material well-mixing more quickly and efficiently. Even if the material has a difference specific gravity and particle size, then also can achieved very good mixing effect by blending staggered blades. This equipment is special for water pipes, plastic floors, wall panels, plastic floor tiles, wires and cables, plastic steel doors, windows, etc.
| Model | Tank Vol. | Power | Machine Weight | Machine Size | Compatible Model |
|---|---|---|---|---|---|
| CW-H200 | 200L | 3HP | 800kg | 1200 x 900 x 1400 mm | Employed with 100L capacity high speed mixer |
| CW-H300 | 300L | 3HP | 900kg | 1300 x 950 x 1500 mm | Employed with 150L capacity high speed mixer |
| CW-H400 | 400L | 5HP | 1100kg | 1600 x 1200 x 1600 mm | Employed with 200L capacity high speed mixer |
| CW-H600 | 600L | 3HP | 1200kg | 1700 x 1350 x 1800 mm | Employed with 300L capacity high speed mixer |
| CW-H800 | 800L | 7.5HP | 1250kg | 2360 x 920 x 1900 mm | Employed with 400L capacity high speed mixer |
| CW-H1000 | 1000L | 7.5HP | 1300kg | 2600 x 1060 x 2050 mm | Employed with 500L capacity high speed mixer |
| CW-H1500 | 1500L | 10HP | 2900kg | 2850 x 1100 x 2150 mm | Employed with 750L capacity high speed mixer |
| CW-H2000 | 2000L | 15HP | 2900kg | 3200 x 1350 x 2250 mm | Employed with 1000L capacity high speed mixer |
| CW-H3000 | 3000L | 15HP | 4500kg | 3700 x 1450 x 2400 mm | Employed with 1200L capacity high speed mixer |
| *Above sizes are for reference only. | |||||